Low-Peak™ LP-CC Series Class CC Time Delay Fuse, Rejection, Current-Limiting, 6/10A, 600Vac/300Vdc, 13/32 x 1-1/2 in.

MFR #: LP-CC-6/10

SKU: 93162850

UPC: 10051712180419

Low Peak™ LP CC Series Class CC 6/10A 600Vac/300Vdc time delay rejection type fuse.

200kA interrupting rating complies with NEC Section 110.9 for today's large capacity systems.
Fast short-circuit protection and dual-element, time-delay performance provide ultimate protection.
Reduces existing fuse inventory by up to 33% when upgrading to Low-Peak fuses.
Consistent 2:1 ampacity ratios for all Low-Peak fuses make selective coordination easy.
Time-delay characteristic avoids unwanted fuse openings from surge currents while fast response speed under short circuit conditions provides a high degree of current limitation.
Current-limitation protects downstream components against damaging thermal and magnetic effects of short-circuit currents.
A superior, all-purpose, space-saving branch circuit fuse that meets most protection requirements up to 30A.
Very compact, with a physical size only 13/32 in. x 11/2 in. (10.3 x 38.1mm) with rejction tip.
Proper sizing can provide no damage Type 2 coordinated protection for NEMA and IEC motor controllers.
Can be used where either a time-delay or a fast-acting fuse is needed, making selection easier and reducing spare fuse inventories for substantial cost reduction.
Superior protection for small horsepower motor circuits.

Bussmann (Eaton)

MFR #: LP-CC-6/10

SKU: 93162850

UPC: 10051712180419

Low Peak™ LP CC Series Class CC 6/10A 600Vac/300Vdc time delay rejection type fuse.

200kA interrupting rating complies with NEC Section 110.9 for today's large capacity systems.
Fast short-circuit protection and dual-element, time-delay performance provide ultimate protection.
Reduces existing fuse inventory by up to 33% when upgrading to Low-Peak fuses.
Consistent 2:1 ampacity ratios for all Low-Peak fuses make selective coordination easy.
Time-delay characteristic avoids unwanted fuse openings from surge currents while fast response speed under short circuit conditions provides a high degree of current limitation.
Current-limitation protects downstream components against damaging thermal and magnetic effects of short-circuit currents.
A superior, all-purpose, space-saving branch circuit fuse that meets most protection requirements up to 30A.
Very compact, with a physical size only 13/32 in. x 11/2 in. (10.3 x 38.1mm) with rejction tip.
Proper sizing can provide no damage Type 2 coordinated protection for NEMA and IEC motor controllers.
Can be used where either a time-delay or a fast-acting fuse is needed, making selection easier and reducing spare fuse inventories for substantial cost reduction.
Superior protection for small horsepower motor circuits.